Epson FX-2175II/N Dot Matrix Printer

Epson FX-2175 II / N Dot Matrix Printer

• Print speed: Up to 476 CPS at 10 CPI
• Versatile paper paths
• Print head life: 2 million strokes

Control Panel:6 switches and 10 LEDs

Print Direction: Bi-direction with logic seeking

Printing Method: Impact dot matrix

Number of Pins in Head:9 pins

Control Code: ESC/P2, IBM PPDS

Printhead life:200 million strokes/wire

Mean Print Volume Between Failure (MVBF):30 million lines (except print head)

Meantime Between Failure (MTBF):15,000 Power On Hours (POH) (25% Duty)

Bitmap Fonts: Epson Draft: 10, 12, 15 cpi
Epson Roman / Epson Sans Serif: 10, 12, 15 cpi, Proportional

Scalable Fonts: Epson Roman / Epson Sans Serif

Barcode: EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, POSTNET

Cut Sheet (Single Sheet):Entry: Front
Length: 100 – 420 mm | (3.9 – 16.5”)
Width: 100 – 420 mm | (3.9 – 16.5”)
Thickness: 0.065 – 0.14 mm | (0.0025 – 0.0055”)
Entry: Rear:
Length: 100 – 420 mm | (3.9 – 16.5”)
Width: 100 – 420 mm | (3.9 – 16.5”)
Thickness: 0.065 – 0.14 mm | (0.0025 – 0.0055”)

Cut Sheet (Multi-part Sheet):Entry: Front
Length: 100 – 420 mm | (3.9 – 16.5”)
Width: 100 – 420 mm | (3.9 – 16.5”)
Thickness: 0.12 – 0.39 mm | (0.0047 – 0.015”)
Entry: Rear
Length: 100 – 420 mm | (3.9 – 16.5”)
Width: 100 – 420 mm | (3.9 – 16.5”)
Thickness: 0.12 – 0.39 mm | (0.0047 – 0.015”)

Continuous Paper (Single Sheet / Multi-part):Entry: Front / Rear / Bottom
Length: 101.6 – 558.8 mm | (4.0 – 22.0”)
Width: 101.6 – 406.4 mm | (4.0 – 16.0”)
Thickness: 0.065 – 0.39 mm | (0.0025 – 0.015”)
Copies:
Original + 4 copies

Envelope (No.6):Entry: Rear
Length: 92 mm | (3.6”)
Width: 165 mm | (6.5”)
Thickness: 0.16 – 0.52 mm | (0.0063 – 0.0205”)

Envelope (No.10):Entry: Rear
Length: 105 mm | (4.1”)
Width: 241 mm | (9.5”)
Thickness: 0.16 – 0.52 mm | (0.0063 – 0.0205”)

Label (Base Sheet):Entry: Bottom
Length: 101.6 – 558.8 mm | (4.0 – 22.0”)
Width: 101.6 – 406.4 mm | (4.0 – 16.0”)
Thickness: 0.16 – 0.19 mm | (0.0063 – 0.0075”)

Card: Entry: Front / Rear
Length: 100 – 148 mm | (3.9 – 5.8”)
Width: 100 – 148 mm | (3.9 – 5.8”)
Thickness: 0.22 mm | (0.0087”)

Roll Paper: Entry: Rear
Diameter: 127mm | (5”)
Width: 216 mm | (8.5”)
Thickness: 0.07 – 0.09 mm | (0.0028 – 0.035”)

Line Spacing:4.23mm (1/6”) or programmable in increments of 0.059mm (1/432”)